Jiangsu Sankon Building Materials Technology Co., Ltd.
Jiangsu Sankon Building Materials Technology Co., Ltd.
Add to Cart
Types of Ball Mill Introduction:
Ball Mill is a key equipment to grind all kinds of ores and other materials. Which is widely used in powder-making production line including cement, silicate, new-type building material, refractory material, fertilizer, ore dressing of ferrous metal and non-ferrous metal, glass ceramics, etc
It can suit dry mill and also wet milling, usually depend on the materials and its usage.
Ball mill desigh:
Ball Mill consists of feed&discharge parts, rotary shell, transmission part and other major components. Hollow shaft is with steel parts, lining is removable. Rotary gear adopts casting hobbing, and the tube body is with resisting liner.
Working Principle:
The ball mill is horizontal cylindrical rotation device, driven by brim gearwheel. There are two chambers and grid of ball mill. Material goes into the first chamber through the feeding inlet. Inside the first chamber, there are stage liners and ripple liners as well as steel balls. The ball mill shell rotates so as to generate electricity, and this force brings ball to a certain height and then balls drop down by gravity, the impact is the grinding force to the material. After the primary grinding, materials go into the second chamber through segregate screen. In ball mill second chamber, there are flat liners and steel ball. After the secondary grinding, material is discharged from the discharging mouth. Then the whole grinding process is ended.
Ball Mill Advantages:
1. High efficiency of grinding
2. Low failure rate
3. Prosper design
4. Convenient usage.
Technical parameters:
Model | Cylinder speed(r/min) | Ball capacity (t) | Material-in size(mm) | Material-out size(mm) | Capacity(t/h) | Motor power(kw) | Weight(T) |
Ø900×1800 | 38 | 1.5 | ≤20 | 0.075-0.89 | 0.65-2 | 15 | 4.2 |
Ø900×3000 | 38 | 2.7 | ≤20 | 0.075-0.89 | 1.1-3.5 | 22 | 5.6 |
Ø1200×2400 | 37 | 3.8 | ≤25 | 0.075-0.6 | 1.5-4.8 | 30 | 11.5 |
Ø1200×3000 | 37 | 5 | ≤25 | 0.074-0.4 | 1.6-5 | 37 | 12.8 |
Ø1200×4500 | 37 | 6.6 | ≤25 | 0.074-0.4 | 1.6-5.8 | 45 | 13.8 |
Ø1500×3000 | 29.7 | 8 | ≤25 | 0.074-0.4 | 2-5 | 75 | 16 |
Ø1500×4500 | 29.7 | 12.5 | ≤25 | 0.074-0.4 | 3-6 | 90 | 22 |
Ø1500×5700 | 29.7 | 15 | ≤25 | 0.074-0.4 | 3.5-6 | 110 | 24.7 |
Ø1830×3000 | 25 | 11 | ≤25 | 0.074-0.4 | 4-10 | 130 | 28 |
Ø1830×4500 | 25 | 15.8 | ≤25 | 0.074-0.4 | 4.5-12 | 155 | 32 |
Ø1830×6400 | 24.1 | 23 | ≤25 | 0.074-0.4 | 6.5-15 | 210 | 36.5 |
Ø1830×7000 | 24.1 | 24 | ≤25 | 0.074-0.4 | 7.5-17 | 245 | 39 |
Ø2100×3000 | 24.6 | 20 | ≤25 | 0.074-0.4 | 7.5-3.6 | 180 | 40 |
Ø2100×4500 | 24.6 | 22.5 | ≤25 | 0.074-0.4 | 7.5-40 | 210 | 48 |
Ø2200×6500 | 21.7 | 25 | ≤25 | 0.074-0.4 | 10-12 | 380 | 52 |
Ø2200×7000 | 21.7 | 28 | ≤25 | 0.06-0.08 | 10-14 | 380 | 54 |
Ø2200×7500 | 21.7 | 29 | ≤25 | <0.08 | 12-14 | 380 | 56 |
Packing & Shipping:
Package conforms to the requirements of customs.
After-sales service:
1.Provide engineers abroad installation and commissioning service.
2.Held online or site training for workers to ensure the safe operation.
3.Our expert will answer any inquiry within 24-48 hours and it will be solved as soon as possible.
4.We supplies the complete technical documents and the relative drawings of the electric components which were written in Chinese and English.
5.Service is available lifelong.